[May-2023] Exam NSE6_FWF-6.4: New Brain Dump Professional - itPass4sure
Free NSE6_FWF-6.4 Exam Dumps to Improve Exam Score
NEW QUESTION # 14
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. A dedicated radio configured for background scanning can support the connection of wireless clients
- C. Background rogue scanning requires DARRP to be enabled on the AP instance
- D. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
Answer: C,D
NEW QUESTION # 15
Refer to the exhibit.
If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?
- A. Areas with the signal strength weaker than -68 dB are cut out of the map
- B. Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility
- C. Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor
- D. Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.
Answer: C
NEW QUESTION # 16
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Enable frequency handoff on the AP to band steer clients
- C. Increase the transmission power of the AP radios
- D. Install another AP in the reception area to improve available bandwidth
Answer: B
NEW QUESTION # 17
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Personal and radius MAC filtering
- B. WPA3 Enterprise
- C. Open, with radius MAC filtering
- D. WPA2 Enterprise
Answer: A
NEW QUESTION # 18
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. FortiSwitch
- B. FortiAP Cloud
- C. FortiGate
- D. AP Manager
Answer: B,C
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION # 19
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- B. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- C. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- D. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
Answer: B
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION # 20
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user purchase activity
- B. Provides real-time insight into user movements
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user online activity
Answer: B
NEW QUESTION # 21
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the AP CLI, using the cw_diag ksta command
- B. On the controller CLI, using the WiFi Client monitor
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the controller CLI, using the diag wireless-controller wlac -d sta command
Answer: D
NEW QUESTION # 22
Refer to the exhibit.
What does the asterisk (*) symbol beside the channel mean?
- A. Indicates channels that can be used only when Radio Resource Provisioning is enabled
- B. Indicates channels that are subject to dynamic frequency selection (DFS) regulations
- C. Indicates channels that cannot be used because of regulatory channel restrictions
- D. Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)
Answer: B
NEW QUESTION # 23
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Broadcast
- B. Static
- C. DHCP
- D. Multicast
Answer: B
NEW QUESTION # 24
What type of design model does FortiPlanner use in wireless design project?
- A. Architectural model
- B. Integration model
- C. Analytical model
- D. Predictive model
Answer: D
NEW QUESTION # 25
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. A WPA2 or WPA3 personal wireless network
- B. An X.509 to authenticate the authentication server
- C. An X.509 certificate to authenticate the client
- D. A WPA2 or WPA3 Enterprise wireless network
Answer: B,D
NEW QUESTION # 26
Which statement is correct about security profiles on FortiAP devices?
- A. Disable DTLS on FortiAP
- B. FortiGate performs inspection the wireless traffic
- C. Only bridge mode SSIDs can apply the security profiles
- D. Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic
Answer: C
NEW QUESTION # 27
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. WPA2 Enterprise
- B. WPA2 Personal and radius MAC filtering
- C. WPA3 Enterprise
- D. Open, with radius MAC filtering
Answer: A
Explanation:
Best security option is WPA2-AES.
NEW QUESTION # 28
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- B. Disable intra-vap-privacy for the Authors vap-wireless network
- C. For both interfaces in the wtp-profile, configure vap-all to be manual
- D. Increase the transmission power of the AP radio interfaces
Answer: A,C
NEW QUESTION # 29
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Reduce the number of wireless networks being broadcast by the AP
- B. Enable frequency handoff on the AP to band steer clients
- C. Increase the transmission power of the AP radios
- D. Install another AP in the reception area to improve available bandwidth
Answer: C
NEW QUESTION # 30
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Installation phase
- C. Site survey phase
- D. Hardware selection phase
Answer: B,C
Explanation:
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
NEW QUESTION # 31
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create wireless LAN specific policies
- B. Set the wireless controller country setting
- C. Create a custom AP profile
- D. Preauthorize APs
Answer: B
NEW QUESTION # 32
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user purchase activity
- B. Provides real-time insight into user online activity
- C. Provides real-time insight into user movements
- D. Provides real-time insight into user usage stats
Answer: D
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION # 33
......
Powerful NSE6_FWF-6.4 PDF Dumps for NSE6_FWF-6.4 Questions: https://freetorrent.itpass4sure.com/NSE6_FWF-6.4-practice-exam.html
