[Nov-2024] Palo Alto Networks PCNSC Actual Questions and Braindumps
Pass PCNSC Exam with Updated PCNSC Exam Dumps PDF 2024
Palo Alto Networks is a renowned name in the cybersecurity industry with its advanced security solutions and products. The company offers a range of certifications for professionals who want to build their careers in network security. One of the most popular certifications offered by Palo Alto Networks is the PCNSC (Palo Alto Networks Certified Network Security Consultant) certification.
The Palo Alto Networks PCNSC exam consists of 60 multiple-choice questions and is timed for 80 minutes. The test covers a range of topics including firewall configuration, network security management, threat prevention, and VPN configuration. PCNSC exam is designed to ensure that candidates have a comprehensive understanding of Palo Alto Networks security solutions, as well as the ability to apply that knowledge to real-world scenarios.
NEW QUESTION # 28
Your customer has asked you to set up tunnel monitoring on an IPsec VPN tunnel between two offices What three steps are needed to set up tunnel monitoring? (Choose three)
- A. Restart each IPsec tunnel
- B. Create a monitoring profile
- C. Enable tunnel monitoring on each IPsec tunnel
- D. Restart each IKE gateway
- E. Add an IP address to each tunnel interface
Answer: B,C,E
Explanation:
To set up tunnel monitoring on an IPsec VPN tunnel between two offices, the following steps are needed:
A:Create a monitoring profile: This profile defines the criteria for monitoring, such as the IP address to ping and the failure condition.
B:Add an IP address to each tunnel interface: Tunnel monitoring requires an IP address on each tunnel interface to send and receive monitoring pings.
E:Enable tunnel monitoring on each IPsec tunnel: This step activates the monitoring profile on the IPsec tunnel, ensuring that the tunnel is actively monitored and can trigger alerts or failover mechanisms if the tunnel goes down.
These steps ensure that the tunnel is properly monitored, allowing for proactive detection and response to connectivity issues.
References:
* Palo Alto Networks - Configuring IPsec Tunnel Monitoring:
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/vpns/site-to-site-vpn/configure-ipsec-tunnel-
NEW QUESTION # 29
Your customer believes that the Panorama appliance is being overwhelmed by the logs from deployed Palo Alto Networks Next-Generation Firewalls.What CLl command can you run to determine the number oflogs per second sent by each firewall?
- A. show log traffic
- B. logging status
- C. debug log-receiver statistics
- D. debug log-sender statistics
Answer: C
Explanation:
To determine the number of logs per second sent by each firewall to a Panorama appliance, the appropriate CLI command to use is:
D:debug log-receiver statistics
This command provides detailed statistics about the logs being received by the Panorama, including the rate at which logs are being sent by each connected firewall. This information can help identify whether the Panorama is being overwhelmed by the volume of logs and which firewalls are contributing the most to the log traffic.
References:
* Palo Alto Networks - CLI Commands for Troubleshooting Panorama: https://docs.paloaltonetworks.com
* Palo Alto Networks - Managing Logs and Log Forwarding:
https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 30
An administrator using an enterprise PKI needs to establish a unique chain of trust to ensure mutual authentication between panorama and the managed firewall and Log Collectors. How would the administrator establish the chain of trust?
- A. Enable LDAP or RADIUS integration.
- B. Set up multiple-factor authentication.
- C. Use custom certificates.
- D. Configure strong password
Answer: C
NEW QUESTION # 31
Identity the Stakeholder with their Role when planning a Firewall Panorama, and Cortex XDR Deployment
Answer:
Explanation:
Explanation:
* Security Engineer- Determines the security, logging, reporting requirements and manages the policy.
* System Administrator- Manages the software distribution method for the Cortex XDR Client.
* Security Operations Analyst- Manages the alerts and responds to threats identified on the network or endpoints.
* Network Engineer- Manages the routing, switching, and general device interconnectivity.
When planning a deployment involving Firewall, Panorama, and Cortex XDR, each stakeholder plays a specific role:
* Security Engineer- This role involves defining and managing security policies, logging configurations, and reporting requirements to ensure compliance and optimal security posture. They are responsible for the overall security configuration and implementation.
NEW QUESTION # 32
What configuration is necessary for Active/Active HA to synchronize sessions between peers?
- A. Enable session preemption on both peers
- B. Use the same virtual IP address on both peers
- C. Configure a floating IP address
- D. Enable session synchronization under the HA settings
Answer: D
NEW QUESTION # 33
An existing customer who has deployed several Palo Alto Networks Next-Generation Firewalls would like to start using Device-ID to obtain policy rule recommendations They have also purchased a Support license, a Threat license a URL Filtering license, and a WildFire license for each firewall What additional license do they need to purchase"?
- A. a Cortex Data Lake license
- B. an Enterprise Data Loss Prevention (DLP) license
- C. an loT Security license (or the perimeter firewall
- D. an loT Security license for each deployed firewall
Answer: A
Explanation:
To start using Device-ID to obtain policy rule recommendations, the customer needs to purchase:
A:a Cortex Data Lake license
The Cortex Data Lake is a cloud-based logging service that aggregates data from all Palo Alto Networks products and services. Device-ID uses this data to provide insights and recommendations for policy rules based on the identities of devices on the network.
References:
* Palo Alto Networks - Cortex Data Lake: https://docs.paloaltonetworks.com/cortex/cortex-data-lake
* Palo Alto Networks - Device-ID Overview:
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/policy/use-device-id-to-enforce-policy
NEW QUESTION # 34
In Panorama the web interface displays the security rules in evaluation order Organize the security rules m the order in which they will be evaluated?
Answer:
Explanation:
Explanation:
In Panorama, security rules are evaluated in a specific order to determine which rule applies to the traffic. The correct evaluation order is as follows:
* Shared pre-rules(evaluated first)
* Device group pre-rules(evaluated second)
* Local firewall rules(evaluated third)
* Device group post-rules(evaluated fourth)
* Shared post-rules(evaluated fifth)
This order ensures that the most generic rules (shared across all devices) are evaluated first, followed by more specific rules at the device group and local firewall levels, and then the post-rules.
References:
* Palo Alto Networks - Panorama Admin Guide:
https://docs.paloaltonetworks.com/panorama/10-0/panorama-admin/policy/policy-precedence-and-evaluati
* Palo Alto Networks - Security Policy Evaluation: https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 35
An administrator has been asked to configure active/passive HA for a pair of Palo Alto Networks NGFWs.
The administrator assigns priority 100 to the active firewall.
Which priority is collect tot the passive firewall?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 36
Which two conditions must be met for a firewall to successfully forward traffic to a syslog server? (Choose two)
- A. A syslog forwarding profile must be created and applied to the appropriate security policies
- B. The firewall must be in Virtual Wire mode
- C. The syslog server must be defined in the Device > Server Profiles > Syslog section
- D. The syslog server must be reachable over a secure connection
Answer: A,C
NEW QUESTION # 37
Which two action would be part of an automatic solution that would block sites with untrusted certificates without enabling SSL forward proxy? (Choose two.)
- A. Create a Security Policy rule with vulnerability Security Profile attached.
- B. Enable the "Block seasons with untrusted Issuers- setting.
- C. Create a no-decrypt Decryption Policy rule.
- D. Configure an EDL to pull IP Addresses of known sites resolved from a CRL.
- E. Configure a Dynamic Address Group for untrusted sites.
Answer: A,B
NEW QUESTION # 38
Which log type would you consult to diagnose why a specific URL is being blocked?
- A. URL Filtering log
- B. Threat log
- C. Traffic log
- D. Data Filtering log
Answer: A
NEW QUESTION # 39
Which two benefits come from assigning a Decrypting Profile to a Decryption rule with a" NO Decrypt" action? (Choose two.)
- A. Block sessions with untrusted issuers
- B. Block credential phishing.
- C. Block sessions with unsuspected cipher suites
- D. Block sessions with expired certificates
- E. Block sessions with client authentication
Answer: A,D
NEW QUESTION # 40
A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch it connect.
How would an administrator configure the interface to IGbps?
- A. set deviceconfig system speed-duplex 10Gbps-full-duplex
- B. set deviceconfig system speed-duplex 1Gbs--half-duplex.
- C. set deviceconfig interface speed-duplex 1Gbs--full-duplex
- D. set deviceconfig interface speed-duplex 1Gbs--half-duplex
Answer: B
NEW QUESTION # 41
A customer wants to combine multiple Ethernet interfaces into a single virtual interface using Link aggregation.
Which two formats are correct for naming aggregate interlaces? (Choose two.)
- A. aggregate.8
- B. ae.8
- C. aggregate.1
- D. ae.1
Answer: B,D
NEW QUESTION # 42
Which version of Global Protect supports split tunneling based on destination domain, client process, and HTTP/HTTPs video streaming application?
- A. Glovbalprotect version 4.0 with PAn-OS 8.1
- B. Glovbalprotect version 4.1 with PAn-OS 8.1
- C. Glovbalprotect version 4.1 with PAn-OS 8.0
- D. Glovbalprotect version 4.0 with PAn-OS 8.0
Answer: A
NEW QUESTION # 43
Which two types of security profiles are recommended to protect against known and unknown threats?
(Choose two)
- A. Anti-Spyware
- B. Antivirus
- C. File Blocking
- D. URL Filtering
Answer: A,B
NEW QUESTION # 44
What happens when a packet from an existing session is received by a firewall that
- A. The firewall requests the sender to resend the packet
- B. The firewall forwards the packet lo the peer firewall over the HA3 link
- C. The firewall drops the packet to prevent any L3 loops
- D. The firewall lakes ownership of the session from the peer firewall
Answer: D
Explanation:
When a packet from an existing session is received by a firewall that is part of an HA (High Availability) pair:
D:The firewall takes ownership of the session from the peer firewall
In a high-availability configuration, if a firewall in an HA pair receives a packet for an existing session that it is not currently handling, it will take ownership of that session from the peer firewall. This ensures seamless continuity of the session and maintains the stateful nature of the firewall's session handling.
References:
* Palo Alto Networks - High Availability Concepts:
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-admin/high-availability/ha-concepts
NEW QUESTION # 45
A Palo Alto Networks NGFW just submitted a file lo WildFire tor analysis Assume a 5-minute window for analysis. The firewall is configured to check for verdicts every 5 minutes.
How quickly will the firewall receive back a verdict?
- A. 5 to 10 minutes
- B. 10 to 15 minutes
- C. 5 minutes
- D. More than 15 minutes
Answer: A
NEW QUESTION # 46
Which touting configuration should you recommend lo a customer who wishes lo actively use multiple pathways to the same destination?
- A. ECMP
- B. BGP
- C. RlPv2
- D. OSPF
Answer: A
Explanation:
For a customer who wishes to actively use multiple pathways to the same destination, the recommended routing configuration is:
B:ECMP (Equal-Cost Multi-Path)
ECMP allows the use of multiple paths to the same destination with equal cost metrics, enabling load balancing and redundancy. It is suitable for scenarios where multiple pathways are desired for traffic distribution and fault tolerance.
References:
* Palo Alto Networks - ECMP Overview:
https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-networking-admin/ecmp
* Palo Alto Networks - Configuring ECMP: https://knowledgebase.paloaltonetworks.com
NEW QUESTION # 47
TAC has requested a PCAP on your Panorama lo see why the DNS app is having intermittent issues resolving FODN What is the appropriate CLI command1*
- A. tcp dump snaplen 53 filter "tcp 53"
- B. tcp dump snap-en 0 filter "app dns"
- C. tcpdump snaplen 0 filter "port 53"
- D. tcpdump snaplen 53 filter "port 53"
Answer: C
Explanation:
To capture a PCAP on your Panorama to troubleshoot DNS resolution issues, the appropriate CLI command is:
B:tcpdump snaplen 0 filter "port 53"
This command captures packets with no size limit (snaplen 0) and filters the traffic for port 53, which is used by DNS. This is the most straightforward and comprehensive way to capture all DNS traffic for analysis.
References:
* Palo Alto Networks - Using tcpdump on PAN-OS: https://knowledgebase.paloaltonetworks.com
* Palo Alto Networks - Troubleshooting Network Connectivity Issues: https://docs.paloaltonetworks.com
NEW QUESTION # 48
An administrator pushes a new configuration from panorama to a pair of firewalls that are configured as active/passive HA pair.
Which NGFW receives the configuration from panorama?
- A. both the active and passive firewalls independently, with no synchronization afterward
- B. the passive firewall, which then synchronizes to the active firewall
- C. the active firewall, which then synchronizes to the passive firewall
- D. both the active and passive firewalls, which then synchronizes with each other
Answer: D
NEW QUESTION # 49
What type of NAT rule is required to translate an internal server's private IP address to a public IP address for external access?
- A. Destination NAT
- B. Source NAT
- C. Dynamic NAT
- D. Bidirectional NAT
Answer: A
NEW QUESTION # 50
......
Palo Alto Networks Certified Network Security Consultant (PCNSC) exam is a certification exam that validates the knowledge and skills required for designing, deploying, configuring, and troubleshooting the Palo Alto Networks security platform. PCNSC exam tests the candidates' understanding of network security concepts, Palo Alto Networks next-generation firewalls, and other security solutions. The PCNSC certification is highly valued by employers and is an essential credential for professionals working in network security.
Latest PCNSC Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://freetorrent.itpass4sure.com/PCNSC-practice-exam.html
